Cyanotis Arachnoidea Extract Ecdysterone98%

Short Description:

Ecdysterone Powder also named hydroxyecdysone, is extracted from the root of Cyanotis Arachnoidea, appearance is light yellow to white crystal powder different from the purity. Ecdysterone Extract significantly increased by amino acids, protein chains to assemble into stimulating muscle cells .


Product Detail

Product Tags

Quality Standand

Coa

Product Name:  Cyanotis Arachnoidea Extract  Ecdysterone

Quality standard: National standard

Specification: 98%

Test method:HPLC

CAS NO: 5289-74-7

Appearance: White powder

Storage method: The product should be sealed and stored in a cool and dry place.

Shelf life: 24 months

Source of extraction: Root

Package specification: 1kg / aluminum foil bag, 25kg/Drum or as required by customers.

Product introduction:cyanotis arachnoidea C.B. Clarke also known as pearl dew aquatic plant, cockscomb root, anemarrhena, spider silk hair blue ear grass (see the list of plants in Yunnan), is a perennial herb of the genus Blue ear in the family Arboplandii. This plant is distributed in the east, central, south and west of Yunnan, and grows on dry slopes, roadsides or wet ground at elevations of 1100-2700m.Guizhou, Guangxi, Guangdong, Fujian, Taiwan and other places in China, in addition to India, Sri Lanka, and Indochina peninsula are also distributed.In Shiping and Xinping counties of Yunnan province and Mianning County of Sichuan Province, dehydrated aquatic plants were planted artificially.It was reported that the -ecdyltin content of the whole grass accounted for 1.2% of its dry weight, and that of the underground part reached 2.9%. General raw material harvest season in September – October.


  • Previous:
  • Next:

    1. RangeThis technical requirement specifies the technical requirements, inspection methods, inspection rules and labels of the extract of Hydroxyecdysone a raw material for health food.This standard is applicable to extracts made from Hydroxyecdysone.Standardization of reference documentThe terms in the following documents become terms of this technical requirement by reference to them. All subsequent amendments (excluding errata) or revisions to dated references shall not apply to this Technical Requirement; however, the parties to an agreement under this Technical Requirement are encouraged to study the availability of the latest version of these documents. For undated references, the latest version is applicable to this technical requirement.GB/T 5009.11 Determination of total arsenic and inorganic arsenic in foodGB/T 5009.12 Determination of lead in foodsGB/T 5009.15 Determination of cadmium in foods

    GB/T 5009.17 Determination of total and organic mercury in foodstuffs

    GB/T 5009.19 Determination of multi – component residues of organochlorine pesticides in food

    GB 4789.2 Microbiological testing of food hygiene – determination of total number of colonies

    GB 4789.3 Microbiological testing of food hygiene – determination of coliform bacteria

    GB 4789.15 Food hygiene microbiology test for mold and yeast counts

    Pharmacopoeia of the People’s Republic of China (2015 edition)

    1. Structual formulaHydroxyecdysone Molecular formula C27H44O7   Molecular weight 480.63

       Cas No.:5289-74-7

      4.1.1 Plant base source Dry Hydroxyecdysone

      4.1.2 Plant raw materials were excavated in spring and autumn, drying and dried in the sun.

      4.1.3 Process Water is extracted, condensed and dried.

      Chart 1  Sensory index

    Item

    Requirement

    Color

    white

    Odor

    Hydroxyecdysonespecial smell,bitter taste

    Property

    Dry powder

    Inpurity

    No

    4.3 Symbolic ingredient

    Conform to chart 2 requirement

    Chart 2   Symbolic ingredient

    Item

    Index

    According to dry powderHydroxyecdysone purity(g/100g)

    More than 30.0

    4.4 Physicochemical requirement

    Conform to chart 3 requirement

    Chart 3 Physicochemical requirement

    Item

    Index

    Partical size[80 mesh pass (%)]     ≧

    90.0

    Moisture(%)                    ≦

    1.0

    Ash content(%)                    ≦

    1.0

    As/(mg/kg)        ≦

    1.0

    Pb/(mg/kg)        ≦

    1.0

    Cd/(mg/kg)        ≦

    0.5

    Hg/(mg/kg)        ≦

    0.5

    Hexachloro-cyclohexane soprocide (mg/kg)              ≦

    0.1

    DDT (mg/kg)              ≦

    0.1

    Huintozene (mg/kg)          ≦

    0.1

    4.5 Microbiological indicator

    Conform to chart 4 requirement

    Chart 4 Microbiological indicators

    Item

    Index

    Total Plate Count/(cfu/g)           ≦

    1000

    Yeast & Mold/(cfu/g)       ≦

    100

    Salmonella

    No

    E.Coli

    No

    Staphylococcus

    No

    5 Test method

    5.1 After opening the sample, smell its smell and taste its taste immediately; In addition, appropriate amount of the sample was placed in a white porcelain plate to observe its color and appearance, and to check for foreign bodies.

    5.2 Physicochemical requirement

    5.2.1 The purity of Hydroxyecdysone   The method was determined according to Appendix A

    5.2.2 Mesh

    The test was carried out according to the screening method stipulated in the General Rule 0982(Second Method) of the Fourth Part of the Pharmacopoeia of the People’s Republic of China (2015).

    5.2.3 Moisture

    The assay was conducted according to the method specified in General Rule 0832(second method) of the fourth part of Pharmacopoeia of the People’s Republic of China (2015 edition).

    5.2.4 Ash content

    The assay was carried out according to the method specified in General Rule 1106 of the fourth part of Pharmacopoeia of the People’s Republic of China (2015 edition)

    5.2.5 Arsenic

    The total arsenic and inorganic arsenic in food were determined according to GB/T 5009.11 method.

    5.2.6 Lead

    According to GB/T 5009.12 for the determination of lead in food.

    5.2.7 Cadmium

    Cadmium in food was determined according to GB/T 5009.15.

    5.2.8 Hg

    The total mercury and inorganic mercury in food were determined according to GB/T 5009.17.

    5.2.9 Hexachloro-cyclohexane soprocide  DDT  Huintozene 

    Execute according to GB/T 5009.19

    5.4 Bacteriological examination

    5.4.1 Total Plate Count

    In accordance with the “national food hygiene standard” GB4789.2

    5.4.2 Yeast & Mold

    In accordance with the “national food hygiene standard” GB4789.15

    5.4.3 E.Coli

    In accordance with the “national food hygiene standard” GB4789.3

    5.4.4 Salmonella

    In accordance with the “national food hygiene standard” GB4789.4

    5.4.5 Staphylococcus

    In accordance with the “national food hygiene standard” GB4789.10

    6 Test rule

    6.1 Test

    Samples were taken according to the method specified in the General Rule 0211 of the Four Parts of the Pharmacopoeia of the People’s Republic of China (2015 edition), and the products that were evenly mixed and had the same nature and quality within a certain limit were tested as the same batch.

    6.2 Inspection Classification

    6.2.1 Delivery inspection

    Before leaving the factory, the quality inspection department of the factory shall inspect the products batch by batch according to the requirements of 4.2 ~ 4.5, and the products that pass the inspection and issue the quality certificate can be sold before leaving the factory.

    6.2.2 Test type

    Carry out type inspection according to chapter 4.Type inspection shall be carried out every six months in case of any of the following situations:

    A) when there is a big change in raw materials;

    B) Adjustment of key processes;

    C) Resuming production after replacing equipment or stopping production;

    D) There is a big difference between the results of ex-factory inspection and the last type inspection.

    6.3 Decision rules

    6.3.1 If one of the inspection results does not meet the technical requirements, samples of twice the quantity shall be randomly selected from the same batch of products for re-inspection, and the re-inspection result shall prevail. If there is still one index unqualified in the reinspection, the batch of products will be judged as unqualified.

    6.3.2 If any item in the microbial project does not meet the technical requirements, it will be judged as unqualified and will not be re-inspected.

    6.3.3 Determination of type inspection is the same as that of factory inspection.

    Labeling, packaging, transportation and storage

    7.1 The label

    7.1.1 The packaging label shall mark: sample name, date of production, batch number of production, specification, gross weight, net weight and execution standard.

    7.1.2 The label content is clearly visible and the label is firmly pasted.

    7.2 The packing

    Packaging materials should meet the requirements of food hygiene. The packaging materials shall be inspected strictly before use. After the barrel is packed, it should be sealed with a seal label.

    7.3 Transportation

    7.3.1 The means of transport shall be clean and hygienic, and shall not be mixed with poisonous, harmful, corrosive or odor articles.

    7.3.2 Light load and light discharge shall be carried out, and extrusion, exposure and rain shall be prevented during transportation.

    7.4 Storage

    7.4.1 The product shall not be stored mixed with toxic, harmful, corrosive or peculiar smell.

    7.4.2 The product should be sealed and stored in a cool and dry place.

    7.5 Shelf life

    Shelf life is 24 months.

    ec12

    Send your message to us:

    Write your message here and send it to us

    Send your message to us: